Glass furnaces run around the clock for years between rebuilds, so an actuator failure can quickly affect glass quality and production.
IPT Engineering has supplied, installed, commissioned and supported Beck electric actuators on glass furnaces, forehearths and gas skids, replacing outdated drives on gas and combustion air valves and dampers.
20 Years in Continuous Service
We also support a Beck glass level probe actuator that was installed as original equipment more than 20 years ago and is still in service today.
Glass level probe actuator, in service for more than 20 yearsBeck actuator on a forehearth combustion damper
Gas Skid Upgrade
In 2008, outdated drives on the furnace gas skid were replaced with Beck electric actuators on the gas and combustion air valves. They are still in service today.
BeforeOriginal gas skid drivesAfterBeck actuators on the gas and combustion air valves, installed in 2008 and still in service
Gas Control Valve Package
Replacing unreliable linear actuators
At a UK container glassworks, a globe valve on the furnace gas skid was controlled by an electric linear actuator with a synchronous motor. It could not meet the modulating requirements of the application and proved very unreliable.
The solution was a Beck Group 31 actuator combined with an adjustable port valve, designed as an assembly to fit the existing pipework footprint, so it dropped straight in. Once commissioned it immediately gave much better control of the gas flow, and the reliability problems ended.
The same glassworks has since carried out two complete furnace, forehearth and line rebuilds, each using around 40 Beck 11-159 actuators in critical high-temperature applications, and has moved its other lines over to Beck as the original actuators fail. The drop-in installation makes each change simple and more cost-effective than maintaining the failing drives.
Beck actuator and adjustable port valve on the furnace gas skidBeck actuators across a rebuilt line
Supply & Support
Beck actuator on a furnace damperBeck drives in our workshop
Have an obsolete, unreliable or unsupported actuator? Send us the nameplate details or a photograph and we will review the application. Contact us or send us the details.